Ubuntu 18.04 is officially out!!! The latest LTS and current version of a most famous opensource desktop operating system from Canonical, released on April 26th, 2018. Ubuntu has been favorite for desktop users for a long time, could see large-scale of deployments in the recent years. Ubuntu releases new OS versions every six months with.
- Install Ubuntu 18.04 Server
- Install Ubuntu 18.04 On Windows 10
- Ubuntu 18 04 Install Nvidia
- Docker Install Ubuntu 18 04
- How To Install Ubuntu 18.04
Introduction: Install Ubuntu 18.04.4 LTS on Your Raspberry Pi Board
The Ubuntu team released the Ubuntu 18.04.4 Long Term Support operating system for Raspberry Pi 2 / 3 / 4 ARM single-board computers.
Brief overview
As we know, Raspbian is based on Debian distro, which is the official operating system for the Raspberry Pi. It is lightweight and remains a top choice, and one of the most popular Raspberry Pi Linux distros. However, there are plenty of additional Raspberry Pi desktop options. Installing Raspbian is easy as well but the problem with Debian is its slow upgrade cycles and older packages.
- Check UEFI or BIOS. First, you need to check if your Windows is using UEFI or legacy BIOS and it is.
- The below steps should also help you get Ubuntu updated after installing. Ubuntu 18.04 LTS might be the best Ubuntu distribution yet as it returns to GNOME Desktop environment, defaults to Xorg as graphics server, brings new themes and many more So, Ubuntu 18.04 should be a giant step forward.
- Ubuntu 18.04 LTS (Bionic Beaver) Select an image. The server install image allows you to install Ubuntu permanently on a computer for use as a server. It will not install a graphical user interface. There is one image available: 64-bit PC (AMD64) server install image.
Running Ubuntu on the Raspberry Pi gives you a richer experience and up to date software. Also, if you work with ROS (Robot Operating System), you know that the main supported OS is Ubuntu.
We have two options when it comes to running Ubuntu on your Raspbian Pi.
The first option is the easiest and the quickest to set up while the second option gives you the freedom to install the desktop environment of your choice.
In December 2019, Canonical published a support roadmap for the latest Raspberry Pi 4 single-board computer on their Ubuntu Server operating system and pledged to fully support Ubuntu on all Raspberry Pi boards.
Recently, the Ubuntu team released the latest point release of our 18.04 Long Term Support operating system 18.04.4, and with that release comes support for the Raspberry Pi boards. You can download the 18.04.4 release of Ubuntu from official website of Ubuntu. This is an official distribution of Ubuntu Server 18.04.4 for Raspberry Pi board.
Ubuntu currently supports Raspberry Pi 2, Raspberry Pi 3, and Raspberry Pi 4 models, and images are available for Ubuntu 18.04.4 LTS (Bionic Beaver), which is the latest LTS (Long-Term Support) release supported until April 2023, and Ubuntu 19.10 (Eoan Ermine), supported until July 2020.
In this tutorial I will show you how to install Ubuntu 18.04.4 on a Raspberry Pi 4 B board.
Supplies:
To follow this tutorial, you need:
- Raspberry Pi 2/3/4 board
- A 16GB or more microSD card.
- HDMI Cable.
- An USB Keyboard.Ethernet Cable.
- Power Adapter for Raspberry Pi.
- A laptop or desktop computer for installing/flashing Ubuntu image on the SD card.
Step 1: Download the Ubuntu Server Image for Raspberry Pi
First you have to download the OS image. Go to the download page of the Ubuntu official website.
Now, scroll down to the Download yourUbuntu Pi image section and click on the download link for either Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi 4 depending on the version of Raspberry Pi you have. I have Raspberry Pi 4 Model B, so I am going to download the Raspberry Pi 4 image with 64-bit version.
Step 2: Flashing Ubuntu Image on MicroSD Card
You can flash Ubuntu image on your microSD card very easily on Windows, Linux and macOS operating system using Etcher. Google windows internet explorer download. Etcher is a really easy to use software for flashing microSD cards for Raspberry Pi devices. You can download Etcher from the official website of Etcher.
Launch Etcher and select the image file and your SD card. The process will take a few minutes, so be patient. When Etcher is done, you can remove your card from the computer.
Step 3: Setting Up the Raspberry Pi
You probably already know that you need a few things to get started with Raspberry Pi such as a mouse, keyboard, HDMI cable etc. You can also install Raspberry Pi headlessly without keyboard and mouse but this tutorial is not about that.
- Plug in a mouse and a keyboard.
- Connect the HDMI cable.
- Insert your MicroSD card.
- Plug in your Ethernet cable, if you're using one.
When everything else is set up, power it on your Raspberry Pi by plugging the power cable.
Step 4: Boot Your Raspberry Pi
After powering on your Raspberry Pi, wait for the boot process to complete and you should see the following message on window.
Login with the default user. The default credentials are:
The first time you log in, you'll be asked to change this password.
After changing the default password, you should be greeted by a message confirming that you're now on Bionic Beaver:
Step 5: WiFi Setup Using Netplan
Starting from Ubuntu 18.04 LTS, Ubuntu uses Netplan to configure network interfaces by default. Netplan is a utility for configuring network interfaces on Linux. Netplan uses YAML files for configuring network interfaces. YAML configuration file format is really simple. It has clear and easy to understand syntax.
To be able to setup Wifi on Raspberry Pi, you first need to get the name of the wifi card by showing physical components using the following command:
In my case it was wlan0. Then navigate to /etc/netplan/ using the cd command
Edit the Netplan YAML configuration file /etc/netplan/50-cloud-init.yaml with the following command:
Add your WiFi access information. Make sure not to use tab for space, use the spacebar to create the blank.
Change the SSID-NAME and the YOUR-NETWORK-PASSWORD with your information. Close and save the file using ctrl+x and press yes.
Now, check whether there's any error in the configuration file with the following command:
If any error encounters then you can check with this command for detailed error information.
Apply the configuration file with the following command:
Finally, reboot your PI
Step 6: Updating and Upgrading Linux Software on Your Pi
To make sure all dependencies are up to date, run the following command
https://ameblo.jp/773inasondepu/entry-12649619410.html. If you want to get the latest versions of software you installed already, run
This command upgrades all the software on your Pi to the latest version. It can take a while to run, so you don't need to do it often. You have to press Y and Enter to confirm.
Step 7: Install the Desktop Components (GUI) on an Ubuntu Server
Ubuntu server is designed to use minimal resources. A GUI will lead to high resource usage, however if you still want a GUI, you can install only what's required. Sometimes you need the GUI on your Ubuntu server to handle simple day-to-day tasks that need quick interaction without going deep into the server settings. You also do have the option of installing a desktop environment. Install the default Unity desktop environment with the following command:
To install the Unity desktop environment without addons like (Email, OpenOffice):
To install a very lightweight desktop environment run bellow command Which is the option key on imac.
or
Afterwards type
When everything else is set up, power it on your Raspberry Pi by plugging the power cable.
Step 4: Boot Your Raspberry Pi
After powering on your Raspberry Pi, wait for the boot process to complete and you should see the following message on window.
Login with the default user. The default credentials are:
The first time you log in, you'll be asked to change this password.
After changing the default password, you should be greeted by a message confirming that you're now on Bionic Beaver:
Step 5: WiFi Setup Using Netplan
Starting from Ubuntu 18.04 LTS, Ubuntu uses Netplan to configure network interfaces by default. Netplan is a utility for configuring network interfaces on Linux. Netplan uses YAML files for configuring network interfaces. YAML configuration file format is really simple. It has clear and easy to understand syntax.
To be able to setup Wifi on Raspberry Pi, you first need to get the name of the wifi card by showing physical components using the following command:
In my case it was wlan0. Then navigate to /etc/netplan/ using the cd command
Edit the Netplan YAML configuration file /etc/netplan/50-cloud-init.yaml with the following command:
Add your WiFi access information. Make sure not to use tab for space, use the spacebar to create the blank.
Change the SSID-NAME and the YOUR-NETWORK-PASSWORD with your information. Close and save the file using ctrl+x and press yes.
Now, check whether there's any error in the configuration file with the following command:
If any error encounters then you can check with this command for detailed error information.
Apply the configuration file with the following command:
Finally, reboot your PI
Step 6: Updating and Upgrading Linux Software on Your Pi
To make sure all dependencies are up to date, run the following command
https://ameblo.jp/773inasondepu/entry-12649619410.html. If you want to get the latest versions of software you installed already, run
This command upgrades all the software on your Pi to the latest version. It can take a while to run, so you don't need to do it often. You have to press Y and Enter to confirm.
Step 7: Install the Desktop Components (GUI) on an Ubuntu Server
Ubuntu server is designed to use minimal resources. A GUI will lead to high resource usage, however if you still want a GUI, you can install only what's required. Sometimes you need the GUI on your Ubuntu server to handle simple day-to-day tasks that need quick interaction without going deep into the server settings. You also do have the option of installing a desktop environment. Install the default Unity desktop environment with the following command:
To install the Unity desktop environment without addons like (Email, OpenOffice):
To install a very lightweight desktop environment run bellow command Which is the option key on imac.
or
Afterwards type
and you are done. Congratulations. You successfully installed Ubuntu desktop on Ubuntu Linux server. https://fabgoo.weebly.com/super-lucky-frog-slot.html.
Step 8: Conclusion
Ubuntu 18.04.4 for Raspberry Pi is a great general-purpose OS with a full desktop environment and a large community filled with resources. It also comes with the added bonus of being available in a 64-bit version to use the Pi to its full potential.
You're officially ready to use Ubuntu on your Raspberry Pi. Keep an eye on the developer's website for future builds.
Be the First to Share
Recommendations
Install Ubuntu 18.04 Server
Anything Goes Contest
Block Code Contest
Make it Real Student Design Challenge
Introduction: Install Ubuntu 18.04.4 LTS on Your Raspberry Pi Board
The Ubuntu team released the Ubuntu 18.04.4 Long Term Support operating system for Raspberry Pi 2 / 3 / 4 ARM single-board computers.
Brief overview
As we know, Raspbian is based on Debian distro, which is the official operating system for the Raspberry Pi. It is lightweight and remains a top choice, and one of the most popular Raspberry Pi Linux distros. However, there are plenty of additional Raspberry Pi desktop options. Installing Raspbian is easy as well but the problem with Debian is its slow upgrade cycles and older packages.
Running Ubuntu on the Raspberry Pi gives you a richer experience and up to date software. Also, if you work with ROS (Robot Operating System), you know that the main supported OS is Ubuntu.
We have two options when it comes to running Ubuntu on your Raspbian Pi.
The first option is the easiest and the quickest to set up while the second option gives you the freedom to install the desktop environment of your choice.
In December 2019, Canonical published a support roadmap for the latest Raspberry Pi 4 single-board computer on their Ubuntu Server operating system and pledged to fully support Ubuntu on all Raspberry Pi boards.
Recently, the Ubuntu team released the latest point release of our 18.04 Long Term Support operating system 18.04.4, and with that release comes support for the Raspberry Pi boards. You can download the 18.04.4 release of Ubuntu from official website of Ubuntu. This is an official distribution of Ubuntu Server 18.04.4 for Raspberry Pi board.
Ubuntu currently supports Raspberry Pi 2, Raspberry Pi 3, and Raspberry Pi 4 models, and images are available for Ubuntu 18.04.4 LTS (Bionic Beaver), which is the latest LTS (Long-Term Support) release supported until April 2023, and Ubuntu 19.10 (Eoan Ermine), supported until July 2020.
In this tutorial I will show you how to install Ubuntu 18.04.4 on a Raspberry Pi 4 B board.
Supplies:
To follow this tutorial, you need: https://bestfload870.weebly.com/how-to-play-the-joker.html.
- Raspberry Pi 2/3/4 board
- A 16GB or more microSD card.
- HDMI Cable.
- An USB Keyboard.Ethernet Cable.
- Power Adapter for Raspberry Pi.
- A laptop or desktop computer for installing/flashing Ubuntu image on the SD card.
Step 1: Download the Ubuntu Server Image for Raspberry Pi
First you have to download the OS image. Go to the download page of the Ubuntu official website.
Now, scroll down to the Download yourUbuntu Pi image section and click on the download link for either Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi 4 depending on the version of Raspberry Pi you have. I have Raspberry Pi 4 Model B, so I am going to download the Raspberry Pi 4 image with 64-bit version.
Step 2: Flashing Ubuntu Image on MicroSD Card
You can flash Ubuntu image on your microSD card very easily on Windows, Linux and macOS operating system using Etcher. Etcher is a really easy to use software for flashing microSD cards for Raspberry Pi devices. You can download Etcher from the official website of Etcher.
Launch Etcher and select the image file and your SD card. The process will take a few minutes, so be patient. When Etcher is done, you can remove your card from the computer.
Step 3: Setting Up the Raspberry Pi
You probably already know that you need a few things to get started with Raspberry Pi such as a mouse, keyboard, HDMI cable etc. You can also install Raspberry Pi headlessly without keyboard and mouse but this tutorial is not about that.
Install Ubuntu 18.04 On Windows 10
- Plug in a mouse and a keyboard.
- Connect the HDMI cable.
- Insert your MicroSD card.
- Plug in your Ethernet cable, if you're using one.
When everything else is set up, power it on your Raspberry Pi by plugging the power cable.
Step 4: Boot Your Raspberry Pi
After powering on your Raspberry Pi, wait for the boot process to complete and you should see the following message on window.
Login with the default user. The default credentials are:
The first time you log in, you'll be asked to change this password.
After changing the default password, you should be greeted by a message confirming that you're now on Bionic Beaver:
Step 5: WiFi Setup Using Netplan
Starting from Ubuntu 18.04 LTS, Ubuntu uses Netplan to configure network interfaces by default. Netplan is a utility for configuring network interfaces on Linux. Netplan uses YAML files for configuring network interfaces. YAML configuration file format is really simple. It has clear and easy to understand syntax.
To be able to setup Wifi on Raspberry Pi, you first need to get the name of the wifi card by showing physical components using the following command:
In my case it was wlan0. Then navigate to /etc/netplan/ using the cd command
Edit the Netplan YAML configuration file /etc/netplan/50-cloud-init.yaml with the following command:
Add your WiFi access information. Make sure not to use tab for space, use the spacebar to create the blank.
Change the SSID-NAME and the YOUR-NETWORK-PASSWORD with your information. Close and save the file using ctrl+x and press yes.
Now, check whether there's any error in the configuration file with the following command:
If any error encounters then you can check with this command for detailed error information.
Apply the configuration file with the following command:
Finally, reboot your PI
Step 6: Updating and Upgrading Linux Software on Your Pi
To make sure all dependencies are up to date, run the following command
If you want to get the latest versions of software you installed already, run
This command upgrades all the software on your Pi to the latest version. It can take a while to run, so you don't need to do it often. You have to press Y and Enter to confirm.
Step 7: Install the Desktop Components (GUI) on an Ubuntu Server
Ubuntu 18 04 Install Nvidia
Ubuntu server is designed to use minimal resources. A GUI will lead to high resource usage, however if you still want a GUI, you can install only what's required. Sometimes you need the GUI on your Ubuntu server to handle simple day-to-day tasks that need quick interaction without going deep into the server settings. You also do have the option of installing a desktop environment. Install the default Unity desktop environment with the following command:
To install the Unity desktop environment without addons like (Email, OpenOffice):
To install a very lightweight desktop environment run bellow command
or
Docker Install Ubuntu 18 04
Afterwards type
and you are done. Congratulations. You successfully installed Ubuntu desktop on Ubuntu Linux server.
Step 8: Conclusion
Ubuntu 18.04.4 for Raspberry Pi is a great general-purpose OS with a full desktop environment and a large community filled with resources. It also comes with the added bonus of being available in a 64-bit version to use the Pi to its full potential.
You're officially ready to use Ubuntu on your Raspberry Pi. Keep an eye on the developer's website for future builds.
Be the First to Share
How To Install Ubuntu 18.04
Recommendations
Anything Goes Contest
Block Code Contest
Make it Real Student Design Challenge
